Zennio 1/2/4/6/8 keys - ZVIT

Polycarbonate capacitive touch switches with customisable icons. 1, 2, 4, 6, or 8 button versions all available with backlit icons that adapt according to ambient luminosity and proximity sensor. Tecla incorporates an internal temperature probe and thermostat as well as 2 analog-digital inputs to be configured as binary inputs, sensors, push buttons, temperature probes or motion detectors. Accessories: temperature probe and motion sensor.

 Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

Siemens KNX Room operator unit - QMX3.P34 - QMX3.P34-1BSC

Room operator unit KNX with temperature sensor, segmented backlit display, touchkeys, black

• • Functions:
    

    • Temperature sensor
    • Segmented backlit display and touchkeys

    Additional functionalities GAMMA

    • Temperature control, adjustable as PWM control and/or modulating control (PID algorithm), for pure heating mode, pure cooling mode, heating and cooling mode
    • Operating modes switchable via KNX and/or display: Comfort mode, Pre-Comfort, energy savings and protection mode
    • Adjustable commissioning and control parameters for radiated heating, slow and fast, floor heating slow and fast
    • Integrated bus coupling unit
    • 3 independently adjustable switching values for CO2 concentration and relative air humidity for air quality control
    • Actuating variable for 1, 2, or 3-stage fans (humidity and CO2)
    • Actuating variable for 1, 2, or 3-point positioning signal (humidity and CO2)
    • Setpoint for room temperature and relative humidity and CO2 concentration adjustable via KNX

Siemens KNX  room thermostat - RDF800KN - RDF800KN/VB

Flush mount touch KNX room thermostat for 2-/4-pipe FCU with on/off output and 2x universal input, fit for both round and square conduit boxes

CJC - LUCIA - KNX - 1 way - CJC7201

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

CJC - LUCIA - KNX - 2 way - CJC7202

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

CJC - LUCIA - KNX - 4 way - CJC7204

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

Eelectron OL-U - KNX switch - regular version - SO08A01KNX

The switch SO08A01KNX of the OL-U® KNX® series for wall installation is equipped with up to 8 mechanical buttons (16 channels) for managing on/off commands, dimmers, rolling shutters and venetian blinds, or other programmable command and control functions. The device can be configured via the ETS® application program and can communicate with the KNX Data Secure protocol.

Frame and buttons covers sold separately:

- Eelectron OL-U - 1 gang frame

- Eelectron OL-U - kit 8 buttons

Ekinex - KNX switch - basic version - FF serie - EK-E32-TP - NO LED)

The 4-fold pushbutton of Ekinex® FF series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Frame and buttons covers sold separately:

- Ekinex - 1 gang frame

- Ekinex - kit 4 buttons