Interra Just Touch ITR328-1002 : 

• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.

 Zennio Flat 1/2/4/6 keys v2 -  Flat 1/2/4/6 keys vT Backlit capacitive touch switch ZVIFV2- ZVIFVT

Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

This switch has full backlit icons. 

Backlit capacitive touch switches in Flat family, with proximity sensor, flat design (9 mm) and total customization.

Anyone can create unique compositions, including images, icons, texts or logos, which are printed on a high-strength tempered glass.

There are models with 1, 2, 4 or 6 configurable buttons and backlit icons, which regulate their brightness with the included ambient luminosity sensor and attenuate when the user is not detected by the proximity sensor.

Flat 1/2/4/6 v2 incorporates an internal temperature probe and thermostat, as well as 2 analog-digital inputs that may be configured for potential-free sensors and push buttons, temperature probes or motion sensors.

Available models: Standard White/Gloss White/Anthracite/Silver or Customized.

Zennio Flat XL 4/6/8/10 keys - ZVIFXLX

Create unique designs, including images, icons, texts or logos printed on tempered glass. 4, 6, 8 or 10-button versions available all with backlit icons that adapt according to ambient luminosity and proximity sensor. Flat XL 4/6/8/10 incorporates an internal temperature probe and thermostat, as well as 2 analog-digital inputs to be configured as binary inputs, sensors, push buttons, temperature probes or motion detectors. Installation in European, Italian, Australian, American or British standard back box. Accessories: temperature probe and motion sensor. Available models: Standard White/Gloss White/Black/Silver or Customised.

Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

This switch has full backlit icons. 

Backlit capacitive touch switches in Flat family, with proximity sensor and total customization.

Anyone can create unique compositions, including images, icons, texts or logos.

There are models with 4, 6, 8 or 10 configurable buttons and backlit icons, which regulate their brightness with the included ambient luminosity sensor and attenuate when the user is not detected by the proximity sensor.

Flat 1/2/4/6 v2 incorporates an internal temperature probe and thermostat, as well as 2 analog-digital inputs that may be configured for potential-free sensors and push buttons, temperature probes or motion sensors.

Available models: Standard Whit/Anthracite/Silver or Customized.

Zennio Flat Display Capacitive touch panel with display ZVIFDV2

This device requires a customization through the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

This switch has full backlit icons. 

Zennio Flat Display Capacitive touch panel with display ZVIFDV2

Backlit capacitive touch panel in Flat family, with proximity and humidity sensor, flat design (9 mm) and total customization. Everyone can create unique compositions, including images, icons, texts or logos, which are printed on a high-strength tempered glass. Room control is simple with the 5 buttons available and up to 8 indicators can be shown on its 2.4" display. The backlit icons for buttons regulate their brightness with the included ambient luminosity sensor and attenuate when the user is not detected by the proximity sensor. Flat Display v2 includes internal temperature probe and humidity sensor, as well as a thermostat and 2 analog-digital inputs that may be configured for potential-free sensors and push buttons, temperature probes or motion sensors. Accessories: temperature probe and motion sensor.

Zennio Flat 55  1/2/4 keys v2 - ZVIF55X

Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

This switch has full backlit icons. 

This device requires a customization through the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

Zennio Flat 55 with Display v2 ZVIF55DV2

Backlit capacitive touch panel with round display in Flat 55 family (standard frames 55 x 55 mm), with proximity sensor, flat design, with total customisation. Flush fitting with Zennio ZS55 frames, switches and sockets. Anyone can create unique compositions, including images, icons, texts or logos, which are printed on a high-strength tempered glass. Room control is simple with the 4 buttons available and up to 4 indicators can be shown on its central display. The backlit icons for buttons regulate their brightness with the included ambient luminosity sensor and attenuate when the user is not detected by the proximity sensor. Flat 55 Display v2 includes a thermostat, as well as 2 analog-digital inputs that may be configured for potential-free sensors and push buttons, temperature probes or motion sensors. Installation in standard mounting box with 55 x 55 frames of 1/2/3/4 modules (white, gloss white, anthracite or silver). Accessories: temperature probe (included) and motion sensor.

Compatible frame.

 Zennio Tecla 55 1/2/4/6 keys - ZVIT55

New family of flush fitting polycarbonate capacitive touch switches with customisable icons, to be combined with 55 x 55 mm frames and Zennio ZS55 switches and sockets. 1, 2, 4 or 6-button versions all available with backlit icons that adapt according to ambient luminosity and proximity sensor. It incorporates a thermostat and one input for temperature probe. Installation in standard back box with 55 x 55 1 to 4-gang frames.
Frame not included

 compatible frame ZS55.

Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

This switch has full backlit icons. 

Backlit capacitive touch switches in Tecla 55 family, with proximity sensor and total customization.

Anyone can create unique compositions, including images, icons, texts or logos.

There are models with 1, 2, 4 or 6 configurable buttons and backlit icons, which regulate their brightness with the included ambient luminosity sensor and attenuate when the user is not detected by the proximity sensor.

Flat 1/2/4/6 v2 incorporates an internal temperature probe and thermostat, as well as 2 analog-digital inputs that may be configured for potential-free sensors and push buttons, temperature probes or motion sensors.

Available models: Standard Whit/Anthracite/Silver or Customized.

 Zennio Tecla XL 4/6/8/10 keys - ZVITXL

New family of Polycarbonate capacitive touch switches with customisable icons. 4, 6, 8 or 10 button versions all available with backlit icons that adapt according to ambient luminosity and proximity sensor. It incorporates an internal temperature probe and thermostat. Installation in European, British, Italian, Australian and American back boxes

Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

This switch has full backlit icons. 

Backlit capacitive touch switches in Tecla 55 family, with proximity sensor and total customization.

Anyone can create unique compositions, including images, icons, texts or logos.

There are models with 4, 6, 8 or 10 configurable buttons and backlit icons, which regulate their brightness with the included ambient luminosity sensor and attenuate when the user is not detected by the proximity sensor.

Flat 1/2/4/6 v2 incorporates an internal temperature probe and thermostat, as well as 2 analog-digital inputs that may be configured for potential-free sensors and push buttons, temperature probes or motion sensors.

Available models: Standard Whit/Anthracite/Silver or Customized.