Theben theLuxa P300 KNX WH 1019610

• Motion detector (PIR)
• Automatic lighting control based on presence and brightness
• For integration into KNX building systems
• For outdoor use
• For installation on walls and ceilings
• Integrated temperature sensor
• For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
• Easy to program with KNX ETS software
• Adjustable brightness switching value and switch-off delay
• Sensitivity can be reduced
• Area limit via lens attachment
• Mixed light measurement
• Teach-in of current brightness value possible
• Pulse function
• Test function for checking detection area
• Installation on flush-mounted socket possible (60 mm)
• Single-handed plug-in installation
• Instant start-up possible via factory preset
• Controls are place protected
• Corner angle includedSpacer and corner angle included

Theben thePixa P360 KNX UP WH Presence detector 2269200.

• Optical presence detector for ceiling installation
• KNX Data Secure
• Rectangular detection area with up to 6 flexible detection zones (Total area 11.0 x 15.5 m │171 m²; at 4.5 m installation height)
• Restriction of the detection area via app (thePixa Plug)
• Automatic presence and brightness-dependent control for lighting and HVAC
• Each detection zone has its own light measurement
• Adjustment of brightness measurements via thePixa Plug app
• Configurable sensitivity of sensor
• Distinction between motion and presence
• Parallel switching of multiple presence detectors (Master/Slave or Master/Master)

Theben theRonda S360 KNX FLAT DE WH 2089560

• Passive infra-red presence detector KNX for ceiling installation
• Circular detection area 360°,Ø 8 m, (50 m2 ) at mounting height 3 m
• 2 channels light and 2 channels presence
• Mixed light measurement
• 2 light channels C1, C2
• Switching operation or constant light control with standby function (orientation light)
• Switching mode with dimmable lighting
• Choice of fully or semi-automatic
• Brightness switching value or set point value can be set in lux by using parameters or via the object
• Teach-in of the brightness switching value or the set point value
• Reduction of time delay when present briefly (short-term presence)
• Manual override by telegram or remote control
• 2 presence channels C4, C5, individually configurable
• Switch-on delay and time delay configurable
• Setting the room correction factor for brightness measurement comparison
• Adjustable sensitivity
• Test mode for checking function and detection area
• Scenes
• Parallel switching of multiple presence detectors (Master/Slave or Master/Master)