Skip to content

System / KNX power supplies


  • JUNG 1280mA KNX power supply 21280REG

    JUNG 1280mA KNX power supply 21280REG

    Rail mounting device, 6 rail units
    ETS product family: System components
    Product type: Power supply

    Intended use

    • Supplying KNX devices with bus voltage
    • Supplying devices with DC voltage
    • Mounting on DIN rail according to EN 60715 in distribution box

     
    Product characteristics

    • Output with integrated choke for supplying KNX bus lines
    • Output DC 30 V for supplying additional devices
    • Nominal current can be subdivided to outputs as desired
    • Reset button
    • Short-circuit proof
    • Overvoltage proof
    • No-load protection
    • Suitable for operation in systems with emergency power supply
    • Floating signal contact for operating and diagnostic message

     

     

    289.20 €
  • Schneider Power supply KNX -1280 mA - MTN6513-1201

    Schneider Power supply KNX -1280 mA - MTN6513-1201

     

    SpaceLogic KNX Power Supply 1280 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – one KNX output with integrated choke and one DC 30 V output for additional devices The power supply has a floating signalling contact for operation and diagnostic message

    344.40 €
  • JUNG KNX power supply, 640 mA 20640REG

    JUNG KNX power supply, 640 mA 20640REG

    rail mounting device, 4 rail units
    ETS product family: System components
    Product type: Power supply

    Intended use

    • Supplying KNX devices with bus voltage
    • Supplying devices with DC voltage
    • Mounting on DIN rail according to EN 60715 in distribution box

     

    200.40 €
  • Schneider Power supply KNX -640 mA - MTN6513-1202

    Schneider Power supply KNX -640 mA - MTN6513-1202

     

    SpaceLogic KNX Power Supply 640 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – one KNX output with integrated choke and one DC 30 V output for additional devices The power supply has a floating signalling contact for operation and diagnostic message

    222.00 €
  • Zennio 640mA KNX power KUPSupply ZPSU640

    Zennio 640mA KNX power KUPSupply  ZPSU640

    KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage. Installation in DIN-rail (4.5 units).

    224.00 €
  • Interra 640mA KNX power supply ITR900-164

    Interra 640mA KNX power supply  ITR900-164 :

    • Mounting Location: Installation only on a 35 mm DIN rail of a distribution board.
    • Device needs at least 4 standard modules width at installation.
    • Power supply has an additional 30 VDC short circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
    • The voltage output is overload, short circuit and over temperature protected.
    • Output without choke can be used as a constant 30 VDC supply and output with choke can be used as a KNX Bus supply.

    189.00 €
  • JUNG KNX power supply, 320 mA 20320REG

    JUNG KNX power supply, 320 mA 20320REG

    rail mounting device, 4 rail units
    ETS product family: System components
    Product type: Power supply

    Intended use

    • Supplying KNX devices with bus voltage
    • Supplying devices with DC voltage
    • Mounting on DIN rail according to EN 60715 in distribution box

     

    178.20 €