System / KNX power supplies
-
JUNG 1280mA KNX power supply 21280REG
JUNG 1280mA KNX power supply 21280REG
Rail mounting device, 6 rail units
ETS product family: System components
Product type: Power supply
Intended use- Supplying KNX devices with bus voltage
- Supplying devices with DC voltage
- Mounting on DIN rail according to EN 60715 in distribution box
Product characteristics- Output with integrated choke for supplying KNX bus lines
- Output DC 30 V for supplying additional devices
- Nominal current can be subdivided to outputs as desired
- Reset button
- Short-circuit proof
- Overvoltage proof
- No-load protection
- Suitable for operation in systems with emergency power supply
- Floating signal contact for operating and diagnostic message
289.20 € -
Schneider Power supply KNX -1280 mA - MTN6513-1201
Schneider Power supply KNX -1280 mA - MTN6513-1201
SpaceLogic KNX Power Supply 1280 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – one KNX output with integrated choke and one DC 30 V output for additional devices The power supply has a floating signalling contact for operation and diagnostic message
344.40 € -
JUNG KNX power supply, 640 mA 20640REG
JUNG KNX power supply, 640 mA 20640REG
rail mounting device, 4 rail units
ETS product family: System components
Product type: Power supply
Intended use- Supplying KNX devices with bus voltage
- Supplying devices with DC voltage
- Mounting on DIN rail according to EN 60715 in distribution box
200.40 € -
Schneider Power supply KNX -640 mA - MTN6513-1202
Schneider Power supply KNX -640 mA - MTN6513-1202
SpaceLogic KNX Power Supply 640 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – one KNX output with integrated choke and one DC 30 V output for additional devices The power supply has a floating signalling contact for operation and diagnostic message
222.00 € -
Siemens KNX Power supply unit DC 29 V, 640 mA - 5WG1125-1AB22
Siemens KNX Power supply unit DC 29 V, 640 mA - 5WG1125-1AB22
KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22
Output current 640 mA
283.20 € -
Zennio 640mA KNX power KUPSupply ZPSU640
Zennio 640mA KNX power KUPSupply ZPSU640
KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage. Installation in DIN-rail (4.5 units).
224.00 € -
Interra 640mA KNX power supply ITR900-164
Interra 640mA KNX power supply ITR900-164 :
- Mounting Location: Installation only on a 35 mm DIN rail of a distribution board.
- Device needs at least 4 standard modules width at installation.
- Power supply has an additional 30 VDC short circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
- The voltage output is overload, short circuit and over temperature protected.
- Output without choke can be used as a constant 30 VDC supply and output with choke can be used as a KNX Bus supply.
189.00 € -
JUNG KNX power supply, 320 mA 20320REG
JUNG KNX power supply, 320 mA 20320REG
rail mounting device, 4 rail units
ETS product family: System components
Product type: Power supply
Intended use- Supplying KNX devices with bus voltage
- Supplying devices with DC voltage
- Mounting on DIN rail according to EN 60715 in distribution box
178.20 €