Zennio MAXinBOX 8 V4 - ZIOMB8V4

KNX multifunction actuator with KNX Secure - 8 outputs 16 A

Multifunction actuator for DIN-rail (4.5 units) with 8 outputs (16 A C-Load) which offer multiple configuration as shutter channels, as individual outputs or as blocks of 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover. It includes 20 independent logical functions. It is compatible with KNX Secure. Accessories: AC/DC shutter adapters.

Schneider KNX - switch-blinds actuator 8-outputs -master- MTN6705-0008

Can be installed in combination with the extension actuator (to obtain 16 or 24 outputs):

Schneider KNX - Switch-blinds actuator 8 outputs - extension - MTN6805-0008

 If your extension is not side by side with the master or the second extension you can use this cable:

Schneider KNX Cable flexible

SpaceLogic KNX Switch/Blind Master. For independent control of up to 4 blind/roller shutter drives or for switching up to 8 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons.

Schneider KNX - switch-blinds actuator 8-outputs - extension -MTN6805-0008

paceLogic KNX Switch/Blind Extension. The SpaceLogic KNX Switch/Blind Extension is a switch actuator that extends the channels of a SpaceLogic KNX Switch/Blind Master or a SpaceLogic KNX Universal Dimming Master. For independent control of up to 4 blind/roller shutter drives or for switching up to 8 loads via make contacts. The function of the blind or switching channels is freely configurable.

 Must be installed in combination with the master actuator:

Schneider KNX - switch-blinds actuator 8 outputs : MTN6705-0008

With "Schneider KNX - Mixed actuator 8 outputs - extension - MTN6805-0008" a connector is supplied for side-by-side installation.

If your extension is not side by side with the master or the second extension you can use this cable:

Schneider KNX Cable flexible

Interra Combo ITR508-16A

• Lighting control can be made with every output of the combo switch actuator.
• Heating control can be made with every output of the combo switch actuator.
• Every output of the combo module can be configured as shutter/blind provided that 2 consecutive outputs are available.
• Shutter/blind 24V configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 2 pipes configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 4 pipes configuration can be with 5 outputs of the combo module. However, it is only available in the first five outputs of the (*) blocks.
• The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.
• Last situation memory against power failure.
(*): Each block consists of every 6 outputs of the combo module that is starts from C1 output.

Siemens KNX Switching actuator 12 x AC 230 V, 10 A - 5WG1532-1DB61

KNX Switching actuator 12 x AC 230 V, 10 AX, C-Load

• N 532D61KNX Switching actuator 12 x AC 230 V, 10 AX, C-Load

   

  Rated contact current according to DIN EN 60669: 10 AX (140 µF fluorescent lamp load), 10 A (resistive load)

  Additional functionalities GAMMA

  Per output
  

  • Selectable operating mode (normal mode, time switch mode, flashing mode)
  • Selectable relay mode (NC/NO)
  • Variable On and Off delay times
  • Two selectable logic operations (AND, OR, NAND, NOR, XOR, FILTER, TRIGGER)
  • Selectable sending of status objects on request, cyclically and/or automatically after a change
  • Selectable switching state on bus voltage failure
  • Selectable start value of the switching object on bus voltage recovery
  • Optional addition of a night mode object for time-limited switching On of the output, i.e. the illumination, at night
  • Variable On period at night or time switch mode
  • Selectable addition of an object to change the On period at night or time switch mode
  • Selectable post-triggering (1x, 2x, 3x, 4x, 5x) of the On period in time switch mode
  • Selectable warning signal prior to imminent switching-off by brief off and on switching (flashing) at night or in time switch mode and/or via an optional warning object

  
  
  Per output selectable functions:
  

  • For manual override ON
  • For permanent OFF switching
  • Blocking of the output
  • For switching on or off in forced mode
  • Counting of operating hours and threshold monitoring
  • Counting of load cycles and threshold monitoring
  • Integrated 8-bit scene control with up to 8 scenes per output

  
  
  

  • Construction site function switching
  • Object for monitoring of device function
  • Object for targeted retrieval of status values

Zennio MAXinBOX 16 V4 - ZIOMB16V4

KNX multifunction actuator with KNX Secure - 16 outputs 16 A

Multifunction actuator for DIN rail (8 units) with 16 outputs (16 A C-Load) which offer multiple configuration as shutter channels, as individual outputs or as blocks of 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover. It includes 20 independent logical functions. It is compatible with KNX Secure. Accessories: AC/DC shutter adapters.

Jung 230161SR

Rail mounting device, 8 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version.
ETS product family: Output
Product type: Binary output

Intended use

• Switching of electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Mounting on DIN rail according to EN 60715 in distribution boxes

 
Product characteristics

• Outputs can be operated manually, construction site mode
• Feedback in manual mode and in bus mode
• Disabling of individual outputs manually or via bus
• Central functions
• Cyclical monitoring
• Can be updated with the ETS Service App

Characteristics switching operation

• Operation as NO or NC contacts
• Feedback function
• Logic operation and forcing function
• Central switching function with collective feedback
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
• Scene function
• Operating hours counter

Characteristics blinds operation

• Suitable for 230 V AC motors
• Operation modes ‘Blind with slats’, ‘Shutter/awning’, ‘Ventilation flap/skylight’
• Blind/shutter position directly controllable
• Slat position directly controllable
• Feedback of movement status, blind/shutter position and slat position
• Cyclical feedback during movement
• Forced position through higher-level controller
• Safety function: rain alarm, frost alarm, 3 independent wind alarms
• Sun protection function with auto Heating/Cooling
• Scene function

The total current of two adjacent outputs must not exceed 20 A.

Interra Combo ITR516-16A

• Lighting control can be made with every output of the combo switch actuator.
• Heating control can be made with every output of the combo switch actuator.
• Every output of the combo module can be configured as shutter/blind provided that 2 consecutive outputs are available.
• Shutter/blind 24V configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 2 pipes configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 4 pipes configuration can be with 5 outputs of the combo module. However, it is only available in the first five outputs of the (*) blocks.
• The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.
• Last situation memory against power failure.
(*): Each block consists of every 6 outputs of the combo module that is starts from C1 output.