Zennio - MAXinBOX Hospitality v3 - ZCLHP126V3

Fan coil controller for 2/4-pipe unit with 2 16A C-load outputs and 6 a/d inputs with KNX Secure

Fan coil controller for 2 or 4-pipes unit with 2-points valves or 3-points valve and up to three fan speeds, for DIN-rail (4.5 units). It includes 2 independent outputs 16 A C-Load, which can be configured as individual outputs or as a shutter channel. Moreover, it has 6 analog-digital multifunction inputs that can be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs. It includes Master Light function, 10 logical functions and allows manual control of the outputs with status indication through LEDs. It is compatible with KNX Secure. Accessories: temperature probe and motion sensor.

Zennio MINiBOX 20 v2 Actuator 2 outputs KNX - ZIOMN20V2

Multifunction actuator with 2 outputs (16 A) with KNX Secure

Multifunction actuator, supporting KNX Secure, for DIN rail (2 units) with 2 outputs (16 A C-load) which offer multiple configurations as shutter channels and individual outputs. It allows manual control of its outputs thanks to the push buttons on the cover and includes a logical function module. It is compatible with KNX Secure.
Accessories: AC/DC shutter adapters.

Zennio MINiBOX 25 V3  Actuator 2 outputs 5 inputs KNX - ZIOMN25V3

Multifunction actuator for DIN-rail (2 units) with 2 outputs (16 A C-load) which offer multiple configurations as shutter channels or individual outputs. It allows manual control of its outputs through the push buttons on the cover and includes a logical function module. It also incorporates 5 analog-digital inputs that may be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs, as well as four room thermostats to control heating/cooling systems. It is compatible with KNX Secure.
Accessories: Temperature probes, motion sensor and AC/DC shutter adapters.

Zennio MINiBOX 40 V3 - Actuator 4 outputs KNX ZIOMN40V3

Multifunction actuator for DIN-rail (2 units) with 4 outputs (16 A C-load) which offer multiple configurations as shutter channels, individual outputs or even 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover and includes a logical function module.

Zennio MINiBOX 45 V3  Actuator 4 outputs 5 inputs KNX - ZIOMN45V3

Multifunction actuator for DIN-rail (2 units) with 4 outputs (16 A C-load) which offer multiple configurations as shutter channels or individual outputs or even 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover and includes a logical function module. It also incorporates 5 analog-digital inputs that may be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs, as well as four room thermostats to control heating/cooling systems. It is compatible with KNX Secure.
Accessories: Temperature probes, motion sensor and AC/DC shutter adapters.

Zennio-MAXinBOX66V3 - 6outputs-6inputs-knx-actuator-ZIOMB66V3

Multifunction sensor-actuator for DIN-rail (4.5 units) with 6 outputs (16 A C-load) which offer multiple configurations as shutter channels or individual outputs. It allows manual control of its outputs through the push buttons on the cover. It includes 10 independent logical functions. In addition, it incorporates 6 analogdigital inputs that may be configured as binary inputs for sensors and potentialfree push buttons, as temperature probe inputs or as motion sensor inputs. Four room thermostats to control heating/cooling systems are included. It is compatible with KNX Secure. Accessories: temperature probe and motion sensor.

Characteristics:

• Mounting on DIN rail (EN 50022), pressurized.
• Does not require a power supply other than the bus power supply.
• Integrated BCU KNX bus coupling unit
• Equipped with 6 action channels configurable as:
  • shutter channels (up to 3)
  • individual outputs (up to 6)
• 6 analog/digital inputs.
• Independent manual control by output with push button and LED status indicator.
• Includes logic functions
• Delay on outputs
• Full data backup in case of power loss
• Withstands capacitive loads, maximum 140 µF.
• Complies with EC directives.

SAFETY INSTRUCTIONS

• Do not connect the main voltage (230V) or other external voltages to the KNX data bus.
• Connecting an external voltage can endanger the electrical safety of the entire KNX system.
• Use rigid cable to connect the outputs or flexible cable with terminals (spikes).
• Always check during installation that there is sufficient insulation between the 230V main voltage conductors and the conductors of the Bus and its extensions.
• It is possible to connect several phases, making sure that each phase is on a different terminal block (block 1, block 2, block 3 and block 4).
• Once the device has been installed, the output terminals must not be accessible.

Zennio-MAXinBOX 88 - 8outputs-8inputs-knx-actuator-ZIOMB88

KNX multifunction actuator with KNX Secure - 8 outputs 16 A / 8 inputs A/D

Multifunction sensor-actuator for DIN-rail (4 units) with 8 outputs (16 A C-load) which offer multiple configurations as shutter channels or individual outputs. It allows manual control of its outputs through the push buttons on the cover. It includes 20 independent logical functions. In addition, it incorporates 8 analog/digital inputs that may be configured as binary inputs for sensors and potential free push buttons, as temperature probe inputs or as motion sensor inputs. Four room thermostats to control heating/cooling systems are included. It is compatible with KNX Secure. Accessories: temperature probe and motion sensor.

JUNG KNX switch actuator 6-gang KNX blinds actuator 3-gang 230061SR

rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Output
Product type: Binary output

Intended use

• Switching of electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Mounting on DIN rail according to EN 60715 in distribution box

 
Product characteristics

• Outputs can be operated manually, construction site mode
• Feedback in manual mode and in bus mode
• Disabling of individual outputs manually or via bus
• Central functions
• Cyclical monitoring
• KNX Data Secure compatible with ETS 5.7.3 or higher
• Can be updated with the ETS Service App