Theben PresenceLight 180° B-KNX 2009050

• Presence detector (PIR)
• Type of protection IP 54
• Mixed light measurement
• Passive infra-red presence detector for wall installation
• Half-round detection area 180°, Ø 16 m, (100 m2 )
• Presence and brightness-dependent control for lighting and HVAC systems
• Choice of fully or semi-automatic lighting control
• Connection option for sensors or switches for manual switching with automatic recognition
• Adjustable sensitivity - Can be configured remotely
• Installation with mechanical stop
• Lighting control with brightness threshold value and self-learning switch-off delay
• Pulse function for staircase time switch
• Presence output with switch-on and switch-off delay
• Room monitoring with selective movement detection
• Parameters can be selected for subsequent changes
• Test operation mode checks the detection area and brightness threshold

Zennio Presentia W0 - ZPDW0VT

Motion detector for in-wall flush mounting into 55 x 55 mm frame, with a detection area of 180º and up to 10 meters length of detection. Fitting with Tecla 55, Flat 55 family and Zennio ZS55 frames, switches and sockets. It includes several channels to be configured for lighting switching control according to luminosity threshold or according to motion detection only. It has two independent sensors whose sensitivity settings can be adjusted for each sensor individually. Master/slave configuration allows using several detectors for larger areas. Installation in standard mounting box with 55 x 55 frames of 1/2/3/4 module (white, anthracite or silver). Frame not included.

compatible frame ZS55.

Available models: Standard Whit/Anthracite/Silver.

Zennio Presentia W0/W1/W2 v2 - ZPDW0V2/1V2/2V2

Motion detector for in-wall flush mounting into 55 x 55 mm frame with no button (Presentia W0 v2), one (Presentia W1 v2) or two (Presentia W2 v2) buttons with customisable backlit icons. Fitting with Tecla 55, Flat 55 family and Zennio ZS55 frames, switches and sockets. Detection area of 180º and up to 10 meters length of detection. It includes several channels to be configured for lighting switching control according to luminosity threshold or according to motion detection only. It has two independent sensors whose sensitivity settings can be adjusted for each sensor individually. Master/slave configuration allows using several detectors for larger areas. Installation in standard mounting box with 55 x 55 frames of 1/2/3/4 module (white, anthracite or silver). Frame not included.

Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

compatible frame ZS55.

Available models: Standard White/Anthracite/Silver.

Surface-mounted housing presence light

• Frame for surface mounting the presence detector
• Colour: Pure white

PRESENCE LIGHT 360° B-KNX

• Presence detector (PIR)
• Type of protection IP 54
• Mixed light measurement
• Passive infra-red presence detector KNX for flush-mounted ceiling installation
• Square detection area 360°, 7 x 7 m, (49 m2 ) at mounting height 3 m
• 2 channels light and 2 channels presence
• Presence and brightness-dependent control for lighting and HVAC systems
• Choice of fully or semi-automatic lighting control
• Connection option for sensors or switches for manual switching with automatic recognition
• Adjustable sensitivity - Can be configured remotely
• Installation with mechanical stop
• Lighting control with brightness threshold value and self-learning switch-off delay
• Pulse function for staircase time switch
• Presence output with switch-on and switch-off delay
• Room monitoring with selective movement detection
• Parameters can be selected for subsequent changes
• Test operation mode checks the detection area and brightness threshold

Theben theLuxa P300 KNX WH 1019610

• Motion detector (PIR)
• Automatic lighting control based on presence and brightness
• For integration into KNX building systems
• For outdoor use
• For installation on walls and ceilings
• Integrated temperature sensor
• For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
• Easy to program with KNX ETS software
• Adjustable brightness switching value and switch-off delay
• Sensitivity can be reduced
• Area limit via lens attachment
• Mixed light measurement
• Teach-in of current brightness value possible
• Pulse function
• Test function for checking detection area
• Installation on flush-mounted socket possible (60 mm)
• Single-handed plug-in installation
• Instant start-up possible via factory preset
• Controls are place protected
• Corner angle includedSpacer and corner angle included

Theben theLuxa P300 KNX BK 1019611

• Motion detector (PIR)
• Automatic lighting control based on presence and brightness
• For integration into KNX building systems
• For outdoor use
• For installation on walls and ceilings
• Integrated temperature sensor
• For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
• Easy to program with KNX ETS software
• Adjustable brightness switching value and switch-off delay
• Sensitivity can be reduced
• Area limit via lens attachment
• Mixed light measurement
• Teach-in of current brightness value possible
• Pulse function
• Test function for checking detection area
• Installation on flush-mounted socket possible (60 mm)
• Single-handed plug-in installation
• Instant start-up possible via factory preset
• Controls are place protected
• Corner angle includedSpacer and corner angle included

Theben theRonda S360 KNX FLAT DE WH 2089560

• Passive infra-red presence detector KNX for ceiling installation
• Circular detection area 360°,Ø 8 m, (50 m2 ) at mounting height 3 m
• 2 channels light and 2 channels presence
• Mixed light measurement
• 2 light channels C1, C2
• Switching operation or constant light control with standby function (orientation light)
• Switching mode with dimmable lighting
• Choice of fully or semi-automatic
• Brightness switching value or set point value can be set in lux by using parameters or via the object
• Teach-in of the brightness switching value or the set point value
• Reduction of time delay when present briefly (short-term presence)
• Manual override by telegram or remote control
• 2 presence channels C4, C5, individually configurable
• Switch-on delay and time delay configurable
• Setting the room correction factor for brightness measurement comparison
• Adjustable sensitivity
• Test mode for checking function and detection area
• Scenes
• Parallel switching of multiple presence detectors (Master/Slave or Master/Master)