Trivum 4-zones audio amplifier RP341V2

Control of the player by KNX system (optional IP router (IPR)),Touchpad.

4 x amplifiers with 2x30 watts each
4 x streaming clients: Each zone has its own streaming client.
1 x DAB + / FM tuner: All zones share this DAB + / FM tuner.
1 x analog line input
Music streaming from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, SoundMachine, NAS and web URLs.
Free app for iOS and Android or can be operated via browser.
Perfectly integrated in KNX.
Drivers for RTI and Control4 available free of charge.
The RP341v2 can be used alone for 4 zones. It can be combined with other trivum sound systems for up to 64 zones.

This device allow to connect an audio device with analog output to the Trivum AudioBus. 

Compatibles amplifier : 

RP341

RP311

Make every audio device Multiroom-able
The trivum InStreamer adds another audio source to your trivum multiroom system. An external audio source, like a CD- or record player, can be connected via analog RCA or digital TOSLINK cable to the InStreamer. On the other hand, the InStreamer is connected via Cat-5 Ethernet cable to your LAN and will be automatically detected and integrated into your trivum system.

Please note that the sound transmission has a small time delay, because the music signal has to be digitized, then transmitted over the network and then converted back. This period is too long for TV sound. Because the sound will then be heard with a time delay to the picture. For CD players, record players or other sources, the time offset is not a problem.

If you want to connect a TV to a trivum multiroom system, please use the analog line inputs of the respective trivum devices or with a trivum analog adapter. If your TV set only has a digital output, you can use a Trivum digital input adapter.

• Line-In
  Assuming your external audio device has a line-out output, you can easily connect it to the trivum InStreamer with an RCA audio cable.
• Digital-In
  With the Digital-In you can connect your external audio source directly via TOSLINK cable. TOSLINK cables have the advantage that they are immune to external influences.

JUNG Smart Radio DAB+ Bluetooth DAB LS BT WW - DAB LS BT SW

Fm radio with display and touch buttons finish LS990

Installation possible in single or multi-station frames with 1 speaker (mono) or 2 speakers (stereo) and LS990 frame available below

Accessories :

Loudspeaker module

Complementary antenna

Frame not included think of the selected one below. It is possible to dissociate the radio from the speakers during installation.

Intended use

• DAB reception in the frequency range 174 MHz to 240 MHz (VHF band III and channel 13)
• FM reception in the frequency range 87.5 MHz to 108 MHz (VHF band II)
• Playback and control of music on mobile devices via Bluetooth
• Installation in flush box with dimensions according to DIN 49073 (recommendation: deep box)